- Part No AL13115-0805FT
- Product Name AL13115-0805FT Single Lid Case
- Interior Length 131.0’’
- Interior Width 15.0’’
- Interior Height 13.25’’
- Removable Lid Non Locking, Removable lid
- Lid Height 5’’
- Base Height 8.25’’
- Exterior Length 134’’
- Exterior Width 18’’
- Exterior Height 17.97’’
- Material RotoMolded Polyethylene
- Manufacturing Process Injection Molded
- Interior Empty
- Color Black
- Hinges Patented Molded-in Metal
- Handles Injection Molded Handles
- Latches Nickel-Black Plated
- Wheels No
- Security Options Padlockable
- Ata Rated Yes
- Weight 0.0
Returns
All returns and exchanges are to be made within 10 days of receiving order.
Merchandise returns must be shipped, pre-paid, at the customer’s expense. All returned items must be in "as-new" condition, in their original packaging, with all accessories enclosed. The original packing slip must be included and the Return Merchandise Authorization (RMA) number must be visible on the outside of the shipping package. To obtain a RMA number, call our customer service department at 888.515.5255. You must be able to provide the following information: the quantity and item number of the product to be returned, the date of purchase, the invoice number, and the cost of the item. Discrepancies or missing information may result in delays or refusal of your refund. Merchandise returned to Cases By Source, Inc. without a RMA number will not be accepted. The issuance of a RMA number does not guarantee that a credit will be issued.
If part of a product becomes defective, the entire item must be returned for credit or replacement within 10 days of the invoice date. A packing slip—with the item number(s) and a description of the defect—must be included in the package. At its discretion, Cases by Source, Inc. will repair or replace defective goods. Please Note: Following repair or replacement, defective goods will be returned to customers in the same box in which they were received by Cases By Source, Inc.
All merchandise returns—defective or otherwise—are subject to thorough inspection by a Cases By Source, Inc. representative. Merchandise credits are issued at the company’s discretion, based on the aforementioned requirements and instructions. A $25.00 re-boxing fee will be charged for credited products not returned in the original manufacturer's packaging.
All returned items are subject to a 15% restocking fee.* Some exceptions applied
Refunds will not be issued for custom case orders.
Refunds exclude shipping charges for returned items that are not defective.
Please allow 2-4 weeks for refunds to be processed and credited to your account. If your order was charged to a credit card, we will need your card number to process the refund (Orders placed online do not provide full disclosure of the card information.)
Warranty
All products come with the manufacturer’s warranty against material and manufacturing defects. This warranty specifically excludes misuse, abuse, and normal expected wear and tear. Wheels are not covered by this warranty.
At our discretion, Cases By Source, Inc. retains the right to repair, replace, or issue credit for products covered by this warranty. Custom product warranties are considered on a case-by-case basis, but must be agreed upon in writing in advance. Products found to be defective more than 30 days after shipment from Cases By Source, Inc. should be returned to us at the customer’s expense. Products found to be defective upon receipt (within 30 days of the invoice date) are to be returned by the most cost-effective method at Cases By Source, Inc.’s expense. Before products are returned, a Return Merchandise Authorization (RMA) must be obtained. See “Returns and Exchanges” section for information about obtaining a RMA.
AL13115-0805FT Single Lid Case
Part Number: AL13115-0805FT
Need more than 20?Get a commercial quote.
Trusted for over 40 years by the US Military, Single Lid Cases offer 20% more protective material in the edges and corners, where it is needed most, ensuring that valuable equipment is kept safe from any unforeseen elements. Available in several sizes, these cases are completely customizable with a wide range of bolt-on options like document holders, casters, humidity indicators and much more.
One-piece construction, molded from lightweight, high-impact polyethylene
Molded-in ribs and corrugations for secure, non-slip stacking, columnar strength, and added protection
Patented molded-in metal inserts for catch and hinge attachment points, which provide strength and spread loads to the container
Positive anti-shear locks, which prevent lid separation after impact, and reduce stress on hardware
Molded-in, tongue-in-groove gasketed parting lines for splash resistance and tight seals, even after impact
Reinforced corners and edges for additional impact protection
Recessed hardware for extra protection