Shopping Cart

Discounts, shipping & taxes will be calculated at checkout.

Your cart is currently empty!

Features / Specs
  • Part No 3i-2011-PRK
  • Product Name Panel ring kit for cases 3I-2011-7 and 3I-2011-8
  • Interior Length 24.8’’
  • Interior Width 14.0’’
  • Interior Height 1.0’’
  • Manufacturing Process Injection Molded
  • Interior Panel Mounting Ring
  • Color Black
  • Hinges No
  • Latches No
  • Wheels No
  • Ata Rated Yes
  • Weight 0.0
Support

Returns

All returns and exchanges are to be made within 10 days of receiving order.

Merchandise returns must be shipped, pre-paid, at the customer’s expense. All returned items must be in "as-new" condition, in their original packaging, with all accessories enclosed. The original packing slip must be included and the Return Merchandise Authorization (RMA) number must be visible on the outside of the shipping package. To obtain a RMA number, call our customer service department at 888.515.5255. You must be able to provide the following information: the quantity and item number of the product to be returned, the date of purchase, the invoice number, and the cost of the item. Discrepancies or missing information may result in delays or refusal of your refund. Merchandise returned to Cases By Source, Inc. without a RMA number will not be accepted. The issuance of a RMA number does not guarantee that a credit will be issued. 

If part of a product becomes defective, the entire item must be returned for credit or replacement within 10 days of the invoice date. A packing slip—with the item number(s) and a description of the defect—must be included in the package. At its discretion, Cases by Source, Inc. will repair or replace defective goods. Please Note: Following repair or replacement, defective goods will be returned to customers in the same box in which they were received by Cases By Source, Inc.

All merchandise returns—defective or otherwise—are subject to thorough inspection by a Cases By Source, Inc. representative. Merchandise credits are issued at the company’s discretion, based on the aforementioned requirements and instructions. A $25.00 re-boxing fee will be charged for credited products not returned in the original manufacturer's packaging.

All returned items are subject to a 15% restocking fee.* Some exceptions applied

 Refunds will not be issued for custom case orders.

 Refunds exclude shipping charges for returned items that are not defective.

Please allow 2-4 weeks for refunds to be processed and credited to your account. If your order was charged to a credit card, we will need your card number to process the refund (Orders placed online do not provide full disclosure of the card information.)

Warranty

All products come with the manufacturer’s warranty against material and manufacturing defects. This warranty specifically excludes misuse, abuse, and normal expected wear and tear. Wheels are not covered by this warranty. 

At our discretion, Cases By Source, Inc. retains the right to repair, replace, or issue credit for products covered by this warranty. Custom product warranties are considered on a case-by-case basis, but must be agreed upon in writing in advance. Products found to be defective more than 30 days after shipment from Cases By Source, Inc. should be returned to us at the customer’s expense. Products found to be defective upon receipt (within 30 days of the invoice date) are to be returned by the most cost-effective method at Cases By Source, Inc.’s expense. Before products are returned, a Return Merchandise Authorization (RMA) must be obtained. See “Returns and Exchanges” section for information about obtaining a RMA.

Panel ring kit for cases 3I-2011-7 and 3I-2011-8

Part Number: 3i-2011-PRK

  • Interior: 24.8’’ x 14.0’’ x 1.0’’
  • Availability: Available
Price: $34.99

Need more than 20?Get a commercial quote.

Panel mounting rings enable attachment of an interface panel that's flush with the case rim, providing room for switches, buttons, ports, etc. Each kit comes with panel ring, drill jigs/templates, drill bit, rubber gasket, and mounting hardware.


Established in 1977 by company founders Dave Sanderson and Steve Kottman, SKB Corporation manufactured its first guitar case in a residential garage in Anaheim, California. Today, with three factories and distribution all over the globe, SKB is recognized as an industry leader in the design and manufacture of molded polymer transport cases.

Vacuum, rotational or injection molded, these cases are engineered to provide the best protection for equipment in many diverse industries, including music and pro-audio products, outdoor and sporting gear, overlanding, and military, industrial and medical applications. It's no wonder that the familiar SKB logo has symbolized uncompromising quality and unsurpassed durability for over four decades.

You Might Also Like

Looking for a Custom Solution?

Using your needs and specifications as a roadmap, we can design, engineer, and manufacture a custom case that matches your vision. Start the conversation with a free consultation!

Custom Solutions